. Aquarium and Pond UV Sterilizer, Clarifier Reviews; Problems

UV Sterilizer Reviews; Information Articles, Ideas, Comments, and Links to even more Resources about how UVC Sterilization works in Aquariums/ Ponds

aquarium and pond UV posts, information, articles, resources, blogs

AQUARIUM AND POND UV STERILIZER REVIEW/ ARTICLES;
Information Articles (Posts), Ideas, Comments, & Links to even more Information about how UV (UVC) Sterilization works in Aquariums/ Ponds.
For a COMPLETE up to date article about aquarium and pond uv sterilization, please visit this site:
UV Sterilization in Aquariums and Ponds; How it works

For all Articles, from basic to advanced, such as UVC, Watts, mW/cm2, please scroll down the Right Side Bar of this site for easy links

Pond UV Clarifier Tips

 

Pond UV Clarifier Tips
Updated 9/6/13

UV Clarifier/ Filter placement
A UV Sterilizer/Clarifier works best when the UV is place AFTER the filter.

I know this contradicts some information I have read and this information is not necessarily wrong either, so let me explain further.
By placing your Clarifier after the filter, you will remove debris that will otherwise make penetration of UVC light difficult, further more in my experience this will greatly reduce the amount of sludge buildup inside your Sterilizer/Clarifier.
I will also note that the gimmicky wipers do not help much with the problem of sludge buildup.

Dirty Pond Filter Sponge Media, MaterialThe reason some pond keepers recommend placing the filter after the UV Sterilizer is to trap algae that often clumps after passing through your clarifier, so as I noted this suggestion is not without merit.

However in practical experience (along with knowledge of how uvc works), I have found that in an either or situation, the first suggestion of placing the filter first allows the most efficient operation of your pond UV Clarifier/Sterilizer.
This said, a pond keeper can always employ both methods for even better results, although even here I find this to make no discernible difference as to clarity, only to the amount of detritus/mulm buildup in the pond (of which controlling this via whatever means possible is certainly useful to good pond hygiene).

The picture above left displays a very dirty pond filter sponge media, this is what you WANT your filter to block from going into your UV Sterilizer. If this accumulated sludge were to enter your UV Clarifier, your UVs effectiveness would be severely diminished.

Filters
This really goes without saying, but I will state the obvious (at least in my opinion, so please do not be insulted by my stating this point this way), use one OR MORE pond filters.

Often I have had persons tell me that they bought a UV Clarifier only to realize that the new pond keeper figured the UV Sterilizer would take care of the green pond all by itself, which often it will not.
I strongly suggest a Veggie Filter in addition to a more traditional Pond Filter such as the Premium SunSun Pressurized Filter.

For further information about this subject, please read this article:
Aquarium and Pond Answers; Veggie Filters.
Pond Algae Control

Flow Rate
A Clear Pond information Maintain a proper flow rate to your UV Clarifier/Sterilizer either by using a slower pump or splitting the flow from your high GPH pump so as to send water to your UV at a slower rate.
This is a common problem in poor UV Sterilizer installation, but easy to solve.
This flow rate should be around 40-50 gph per watt for clarification in most common UV Sterilizers/Clarifiers or 55-65 gph per watts for premium high dwell time UV Clarifiers such as the TMC Pond Advantage.

Please click on the picture above for a larger view at this complete

Please see the "Complete Information" UV Sterilization article for more about this subject: UV Sterilization; How it Works

More information on TMC UV Advantage:
TMC Pond Advantage
Pond Information Article

Do not waste time or money on gimmicks
I will not waste space addressing this other than stating gimmicks such as wipers or “twists” do little to improve UV Sterilization, other than lightening up your wallet.
Please read this Aquarium/Pond UV Blog Post for more about this subject:
“UV Sterilizer Truths”

Maintenance
Clean your UV Sterilizer unit with each UV bulb change, which for a pond should be every season or every six months in warmer climates such as Southern California, Florida, Texas, etc.
Make sure models with a quartz sleeve get the quartz sleeve cleaned as well, especially of hard water deposits (which wipers do little for).

For low price, first quality UV replacement bulbs follow these links (depending on your bulb type):
T-8 and T-5 UV replacement bulbs, 8-50 watt, Laguna, Emperor, Aqua, Fishmate, Hawaiian Marine, Savio, GammaStandard UV Replacement Bulbs For T-5 & T-8 UV Replacement bulbs, 4 thru 55 watt; to fit Laguna, Emperor, Aqua, Aquanetics, Custom 15, Fishmate Compact, Hawaiian Marine Angstrom 2537® UV, Savio, Current USA Gamma and more.


Compact UV Bulb, UVC replacement bulbs, 5, 7, 9, 13, 18, 36, 55 watt Compact UV Replacement bulbs For (PLS, PLL, with G11 & G23 bases to fit 95% of UV Clarifiers/Sterilizers calling for this type of UVC bulb, please click the picture on the left.


For the absolute best in high dwell pond UV Clarifiers, the TMC Pond Advantage are well worth the extra expense as per their effectiveness, long life, and availability of parts.


Labels: , , , , ,

0 Comments:

Post a Comment

Subscribe to Post Comments [Atom]

<< Home